Honda NC700 2012 Service Manual page 316

dummyhead dummyhead
DISASSEMBLY/ASSEMBLY
Remove the washers [1] and rocker arms from the
rocker arm shaft [2].
Apply molybdenum oil solution to the rocker arm sliding
surface and rocker arm shaft outer surface.
Install the washers and rocker arms to the rocker arm
shaft.
Rocker arm identification tips
• "PWC-A" mark: exhaust rocker arm A [3]
• White paint mark: Intake rocker arm S [4]
• No mark: Intake rocker arm P [5]
• "PWC-B" mark: exhaust rocker arm B [6]
INSPECTION
Check the sliding surface of each rocker arm for wear
or damage.
Check the oil hole for clog of each rocker arm.
Measure the rocker arm I.D.
SERVICE LIMIT: 20.041 mm (0.7890 in)
[3]
[4]
[2]
[3]
[4]
[5]
[6]
[1]
CYLINDER HEAD/VALVES
[5]
[6]
[1]
10-9