Honda NC700 2012 Service Manual page 555

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Disconnect the spark plug cap [1].
Release the spark plug wire clamp [2] from the frame.
Remove the bolts [1] and stay [2] from the frame.
Disconnect the EOP switch 1P (Gray) connector [3].
Disconnect the clutch EOP sensor 3P connectors [1].
Remove the bolts [2] and clamps [3].
Disconnect the ECT sensor 2P connector [1].
Loosen the band screw and disconnect the water hose
[2] from the thermostat cover.
Release the main wire harness [3] from the stay [4] and
frame [5].
16-12
[2]
[3]
[2]/[3]
[4]
[1] [3]
[1]
[1] [2]
[1]
[2]
[5]