Honda NC700 2012 Service Manual page 700

dummyhead dummyhead
5. Speed Sensor Line Open Circuit Inspection
Short the ABS modulator 25P connector [1]
terminals of the wire harness side with a jumper wire
[2].
Connection: Blue – White
TOOL:
Test probe
Check for continuity between the terminals of the
wire harness side rear wheel speed sensor 2P
(Gray) connector [3].
Connection: Blue – White
Is there continuity?
YES
NO
6. Failure Reproduction with a New Speed Sensor
Replace the rear wheel speed sensor with a new
one (page 20-26).
Connect the ABS modulator 25P and rear wheel
speed sensor 2P (Gray) connectors.
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Dose the ABS indicator indicate the code "13,
14, 23 or 43"?
YES
NO
PROBLEM CODE 31, 32, 33, 34, 37 or
38 (Solenoid Valve)
1. Failure Reproduction
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Does the ABS indicator indicate the code "31,
32, 33, 34, 37 or 38"?
YES
NO
07ZAJ-RDJA110
– GO TO STEP 6.
– Open circuit in Blue or White wire
– Faulty ABS modulator
– Faulty removed wheel speed sensor
– Faulty ABS modulator
– Solenoid valve is normal (intermittent
failure).
ANTI-LOCK BRAKE SYSTEM (ABS)
[2]
Bu
W
W
[1]
[3]
Bu
[1]
[1]
20-19