Honda NC700 2012 Service Manual page 266

dummyhead dummyhead
REMOVAL
Remove the fuel tank (page 7-8).
Clean around the fuel pump.
Loosen the fuel pump mounting nuts [1] in a crisscross
pattern in 2 or 3 steps and remove the nuts.
Remove the fuel pump unit [2] and packing [3].
Be careful not to damage the fuel level sensor float arm.
DISASSEMBLY/INSPECTION
Remove the screws [1] and Black wire terminals [2].
Disconnect the Pink wire connector [3] and Blue wire
connector [4].
Remove the fuel pump unit assembly [1] and O-ring [2]
from the fuel pump stay [3].
Remove the chamber [1].
Release the tab [2] and remove the fuel level sensor
assembly [3] from the fuel filter [4].
[2]
[1]/[2] [1]/[2]
[3]
[1]
[3]
[2]
[3]
FUEL SYSTEM
[1]
[3]
[4]
[2]
[1]
[4]
7-11