Honda NC700 2012 Service Manual page 125

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
REMOVAL/INSTALLATION (NC700XD/
SD)
Remove the lower cowl (page 2-29).
Remove the bolts [1] and left rear cover [2].
Remove the drive chain guide plate [3] from the left rear
cover.
Installation is in the reverse order of removal.
RIGHT ENGINE SIDE COVER
(NC700XD/SD)
REMOVAL/INSTALLATION
Remove the lower cowl (page 2-29).
Remove the socket bolts [1] and right engine side cover
[2].
Installation is in the reverse order of removal.
GUARD PIPE (NC700XD/SD)
REMOVAL/INSTALLATION
Remove the lower cowl (page 2-29).
Release the shift pedal angle sensor 3P (Black)
connector (Optional) [1] from the guard pipe [2] and
clamp [3].
Remove the bolts [4], nuts [5] and guard pipe.
Release the fuel tank drain hose B [6] and battery box
drain hose [7].
If necessary, remove the socket bolts [8] and motor
guard [9].
Installation is in the reverse order of removal.
2-30
[3]
[2]
[1]
[1] [3]
[4] [2] [7]
[2] [1]
[8]
[6] [4]/[5] [9]