Honda NC700 2012 Service Manual page 701

dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
PROBLEM CODE 51, 52 or 53 (Pump
Motor)
1. Fuse Inspection
Check the ABS fuse 30 A (ABS M.) [1] in the fuse
box for blown.
Is the fuse blown?
YES
NO
2. Motor Power Input Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
Check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Connection: Violet/white – Ground
TOOL:
Test probe
Is there continuity?
YES
NO
3. Motor Power Input Line Open Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
Measure the voltage between the ABS modulator
25P connector of the wire harness side and ground.
Connection: Violet/white (+) – Ground (–)
Standard:
TOOL:
Test probe
Does the standard voltage exist?
YES
NO
20-20
– GO TO STEP 2.
– GO TO STEP 3.
07ZAJ-RDJA110
– Short circuit in Violet/white wire
– Intermittent failure. Replace the ABS fuse
30 A (ABS M.) with a new one, and
recheck.
Battery voltage
07ZAJ-RDJA110
– GO TO STEP 4.
– Open circuit in Violet/white or Black wire
between the battery and ABS modulator
25P connector
NC700XA/SA shown:
[1]
[1]
[1]
V/W
V/W