Table of Contents
Advertisement
dummyhead
dummyhead
Remove the clutch outer guide [1].
INSPECTION
CLUTCH LIFTER BEARING
Turn the inner race of the clutch lifter bearing [1] with
your finger.
The bearing should turn smoothly and quietly.
Also check that the outer race of the bearing fits tightly
in the pressure plate.
Replace the clutch lifter bearing if the inner race does
not turn smoothly, quietly, or if the outer race fits loosely
in the lifter plate.
CLUTCH SPRING
Measure the clutch spring free length.
Replace the clutch
springs as a set.
SERVICE LIMIT: 41.7 mm (1.64 in)
CLUTCH CENTER
Check the grooves [1] of the clutch center for damage
or wear caused by the clutch plates.
Replace it if necessary.
CLUTCH/GEARSHIFT LINKAGE (NC700X/XA/S/SA)
[1]
[1]
[1]
11-9
Hide quick links:
Advertisement
Table of Contents
