Honda NC700 2012 Service Manual page 488

dummyhead dummyhead
INSPECTION
Check the starter driven gear for abnormal wear or
damage.
Measure the starter driven gear boss O.D.
SERVICE LIMIT: 57.73 mm (2.273 in)
Check the starter clutch outer [1] inner surface for
abnormal wear or damage and replace them if
necessary.
Measure the clutch outer I.D.
SERVICE LIMIT: 74.46 mm (2.931 in)
Check the starter one-way clutch [2] for abnormal wear
or damage and replace them if necessary.
INSTALLATION
STARTER DRIVEN GEAR
STARTER CLUTCH OUTER
ONE-WAY CLUTCH
FLYWHEEL
ALTERNATOR/STARTER CLUTCH
[1]
30 N·m (3.1 kgf·m, 22 lbf·ft)
[2]
13-11