Honda NC700 2012 Service Manual page 605

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Remove the ignition switch wire harness clamp [1] and
NC700X/XA/XD:
immobilizer receiver wire harness clamp [2].
Remove the bolt [1] and brake hose clamp [2] from the
NC700X:
bottom bridge.
Remove the following:
NC700S/SA/SD:
– Headlight/headlight stay (page 2-27)
– Handlebar
– NC700S/SA (page 17-10)
– NC700SD (page 17-12)
Disconnect the ignition switch 2P (Brown) connector [1]
and immobilizer receiver 4P (Black) connector [2].
Remove the headlight cover (page 2-27).
NC700S/SA/SD:
Disconnect
connector [1].
Remove the socket bolts [2], brake hose guide [3] and
combination meter/stay [4].
17-34
the combination meter
NC700X/XA/XD:
[1]
NC700X:
NC700S/SA/SD:
[2]
NC700S/SA/SD:
16P (Gray)
[1]
[2]/[3]
[1]
[2]
[2]
[1]
[4]
[2]