Honda NC700 2012 Service Manual page 713

dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
Remove the ABS modulator mounting bolts [1] and
ABS modulator [2] from the ABS modulator stay [3].
Installation is in the reverse order of removal.
• Apply brake fluid to the joint nut threads and sliding
surface.
• Route the wire harness properly (page 1-25).
TORQUE:
PCV mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Delay valve mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Brake pipe joint nut:
14 N·m (1.4 kgf·m, 10 lbf·ft)
TR SENSOR
3P (BLACK) CONNECTOR
ABS MODULATOR STAY
MOUNTING BOLTS/COLLARS
ABS MODULATOR
25P CONNECTOR
20-32
JUNCTION D
24P CONNECTOR
SHIFT SPINDLE ANGLE SENSOR
3P (GRAY) CONNECTOR
[3]
DELAY VALVE MOUNTING BOLTS
12 N·m (1.2 kgf·m, 9 lbf·ft)
DELAY VALVE
ABS MODULATOR/STAY
LINEAR SOLENOID VALVE
4P (GREEN) CONNECTOR
[2]
[1]
PCV MOUNTING BOLT (LONG)
12 N·m (1.2 kgf·m, 9 lbf·ft)
PCV
PCV MOUNTING BOLT (SHORT)
12 N·m (1.2 kgf·m, 9 lbf·ft)
BRAKE PIPE JOINT NUT
14 N·m (1.4 kgf·m, 10 lbf·ft)