Table of Contents
Advertisement
dummyhead
dummyhead
REMOVAL/INSTALLATION (NC700XD/
SD)
Remove the socket bolts [1].
Release the bosses [2] from the grommets [3] and
remove the lower cowl [4].
Installation is in the reverse order of removal.
DISASSEMBLY/ASSEMBLY
Remove the screws [1].
Release the tabs [2] from the slits [3] and separate the
left lower cowl [4], right lower cowl [5] and center lower
cowl [6].
Assembly is in the reverse order of disassembly.
Align the left and right lower cowl holes [7] with center
lower cowl bosses [8].
LEFT REAR COVER
REMOVAL/INSTALLATION (NC700X/
XA/S/SA)
Remove the gearshift arm pinch bolt [1] and gearshift
arm [2].
Remove the bolts [3] and left rear cover [4].
Remove the drive chain guide plate [5] and collar [6]
from the left rear cover.
Installation is in the reverse order of removal.
• Align the gearshift arm slit with the punch mark.
• Replace the gearshift arm pinch bolt with a new one.
TORQUE:
Gearshift arm pinch bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
FRAME/BODY PANELS/EXHAUST SYSTEM
[3]
[1]
[2]
[1]
[3]
[2]
[6]
[4]
[5]
Align
[4]
[8]
[5]
[7]
[1]
[3]
[6]
[4]
[1]
[2]
2-29
Hide quick links:
Advertisement
Table of Contents
