Honda NC700 2012 Service Manual page 346

dummyhead dummyhead
CLUTCH OUTER/PRIMARY DRIVEN GEAR/CLUTCH
OUTER GUIDE
Check the slots of the clutch outer for damage or wear
caused by the clutch discs.
Check the primary driven gear for abnormal wear or
damage.
Measure the I.D. of the primary driven gear.
SERVICE LIMIT: 32.09 mm (1.263 in)
Replace the clutch outer assembly if necessary.
Measure the O.D. and I.D. of the clutch outer guide.
SERVICE LIMITS:
O.D.: 31.92 mm (1.257 in)
I.D.: 22.03 mm (0.867 in)
Calculate the primary driven gear-to-clutch outer guide
clearance.
SERVICE LIMIT: 0.10 mm (0.004 in)
MAINSHAFT
Measure the mainshaft O.D. at clutch outer guide
sliding surfaces.
SERVICE LIMIT: 21.95 mm (0.864 in)
Calculate
clearance.
SERVICE LIMIT: 0.08 mm (0.003 in)
CLUTCH/GEARSHIFT LINKAGE (NC700X/XA/S/SA)
the clutch outer guide-to-mainshaft
11-11