Honda NC700 2012 Service Manual page 427

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
2. Shift Switch Inspection
Turn the ignition switch OFF.
Check for continuity between the switch side left
handlebar switch connector [1] terminals in each
switch position.
Connection:
"+" switch:
Green/blue – Yellow/red
"–" switch:
Light green/red – Yellow/red
Is there continuity with the switch pushed and
no continuity with the switch released?
YES
NO
3. Shift Switch Input Line Open Circuit Inspection
Connect the ECM test harness to the PCM
connectors (page 4-14).
Check for continuity between the wire harness side
left handlebar switch connector [1] and test harness
[2] terminals.
Connection: Blue/yellow – A7
Is there continuity?
YES
NO
12-72
– GO TO STEP 3.
– Faulty shift switch
Light green/red – A30
– GO TO STEP 4.
– • Open circuit in the Blue/yellow wire
• Open circuit in the Light green/red wire
NC700XD:
[1]
Y/R
Lg/R
Y/R
NC700SD:
[1]
Lg/R
G/Bu
Y/R
NC700XD:
[1]
Bu/Y
Lg/R
NC700SD:
[1]
Bu/Y
Lg/R
G/Bu
A7 [2]
A30
A7 [2]
A30