Honda NC700 2012 Service Manual page 550

dummyhead dummyhead
Disconnect the spark plug cap [1].
Release the spark plug wire clamp [2] from the frame.
Remove the bolts [1] and stay [2] from the frame.
Disconnect the EOP switch 1P (Gray) connector [3].
Disconnect the ECT sensor 2P connector [1].
Loosen the band screw and disconnect the water hose
[2] from the thermostat cover.
Release the main wire harness [3] from the stay [4] and
frame [5].
Remove the bolts [1] and clutch cable guide [2], then
disconnect the clutch cable [3] from the clutch lifter arm
[4].
ENGINE REMOVAL/INSTALLATION
[2]
[3]
[4]
[1] [3]
[4] [3] [2]
[1]
[1]
[1] [2]
[2]
[5]
16-7