Honda NC700 2012 Service Manual page 489

dummyhead dummyhead
ALTERNATOR/STARTER CLUTCH
Apply engine oil to the starter one-way clutch [1] sliding
surface.
Install the starter one-way clutch to the starter clutch
outer [2].
Install the starter clutch assembly [1].
Hold the flywheel [1] using the special tool.
TOOL:
Flywheel holder [2]
Apply locking agent to the starter clutch socket bolt
threads (page 13-4).
Install and tighten the starter clutch socket bolt [3] to the
specified torque.
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Install the starter driven gear [1] into the starter clutch
outer while
counterclockwise.
Recheck the one-way clutch operation (page 13-8).
Install the flywheel (page 13-9).
13-12
07725-0040001
turning the starter driven
[1]
[2]
[1]
[1]
[3]
[1]
gear
[2]