Honda NC700 2012 Service Manual page 348

dummyhead dummyhead
Apply engine oil to the clutch discs entire surface.
Install the spring seat [1], judder spring [2] and clutch
disc B [3] to the clutch center [4].
Install the clutch discs C [5] and clutch plates [6]
alternately, starting with the clutch plate.
Install the clutch disc A [7] and pressure plate [8].
7° 30'
CLUTCH DISC A:
CLUTCH DISC B:
5.3 – 5.9 mm (0.21 – 0.23 in)
9°
CLUTCH DISC C:
Install the clutch center assembly [1] to the clutch outer
[2].
• Align the clutch disc A/C tabs with clutch outer slits
[3].
• Align the clutch disc B tabs with clutch outer shallow
slots [4].
Install the clutch assembly [1] to the clutch outer guide.
CLUTCH/GEARSHIFT LINKAGE (NC700X/XA/S/SA)
[6]
[1] [2] [3]
[4]
[1]
[3]
[1]
[8]
[7]
[5]
[4] [2]
11-13