Honda NC700 2012 Service Manual page 703

dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
3. Relay Power Input Line Open Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
Measure the voltage between the ABS modulator
25P connector of the wire harness side and ground.
Connection: Black/white (+) – Ground (–)
Standard:
TOOL:
Test probe
Does the standard voltage exist?
YES
NO
4. Failure Reproduction
Connect the ABS modulator 25P connector.
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Does the ABS indicator indicate the code "54"?
YES
NO
PROBLEM CODE 61 or 62 (Power
Circuit)
1. Fuse Inspection
Check the ABS fuse 7.5 A (ABS MAIN) [1] in the
fuse box for blown.
Is the fuse blown?
YES
NO
20-22
Battery voltage
07ZAJ-RDJA110
– GO TO STEP 4.
– Open circuit in Black/white or Black wire
between the battery and ABS modulator
25P connector
– Faulty ABS modulator
– Fail-safe relay is normal (intermittent
failure)
– GO TO STEP 2.
– GO TO STEP 3.
Bl/W
[1]
NC700XA/SA shown:
[1]
[1]