Honda NC700 2012 Service Manual page 562

dummyhead dummyhead
Install the spark plug wire clamp [1] to the frame.
Connect the spark plug cap [2].
Connect the water hose [3] to the water pump.
Tighten the water hose band screw to the specified
range.
Install the clip [1] to the fuel rail.
Connect the injector 2P (Gray) connectors [2].
Connect the VS sensor 3P (Black) connector [1].
ENGINE REMOVAL/INSTALLATION
[2] [3]
0 – 1 mm
(0 – 0.04 in)
[1]
[1]
[1]
[2]
16-19