Honda NC700 2012 Service Manual page 490

dummyhead dummyhead
STATOR
REMOVAL
Remove the alternator cover (page 13-5).
Remove the alternator wire clamp bolt [1], wire clamp
[2] and grommet [3] from the alternator cover.
Remove the alternator stator mounting bolts [4] and
stator [5].
INSTALLATION
10 N·m (1.0 kgf·m, 7 lbf·ft)
STATOR
ALTERNATOR COVER
Install the stator [1] to the alternator cover.
Apply locking agent to the alternator stator mounting
bolt threads (page 13-4).
Tighten the alternator stator mounting bolts [2] to the
specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Apply liquid sealant (Three bond 1207B or equivalent)
to the alternator wire grommet [3] sealing surface, then
install it into the alternator cover groove securely.
Apply locking agent to the alternator wire clamp bolt
threads (page 13-4).
Install the wire clamp [4] and alternator wire clamp bolt
[5].
Tighten the bolt to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the alternator cover (page 13-5).
ALTERNATOR/STARTER CLUTCH
[3]
[1]
[2]
10 N·m (1.0 kgf·m, 7 lbf·ft)
WIRE CLAMP
[3]
[5]
[4]
[5]
[4]
[1]
[2]
13-13