Honda NC700 2012 Service Manual page 675

dummyhead dummyhead
HYDRAULIC BRAKE
Apply 0.4 g (0.01 oz) minimum of silicone grease to the
adjuster bolt threads and piston sliding surface.
Install the adjuster bolt/piston [1] while holding the
brake shaft [2].
Apply 0.4 g (0.01 oz) minimum of silicone grease to the
brake shaft boot lips.
Install the brake shaft boot [1] to the caliper groove.
Install the brake arm [1] by aligning with the punch
marks.
Install the lock nut [1] and tighten it to the specified
torque while holding the brake arm [2].
TORQUE: 17 N·m (1.7 kgf·m, 13 lbf·ft)
19-36
[2]
[1]
Align
[1]
[2]
[1]
[1]