Honda NC700 2012 Service Manual page 123

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
FRONT FENDER
REMOVAL/INSTALLATION
Remove the bolts [1], hose guide [2], socket bolts [3], washers [4] and front fender [5] from the fork legs.
Remove the flange collars (E, ED, F, KO, RU type) [6], reflector (U type) [7], grommets [8], front fender brace
[9] and collars [10] from the front fender.
Installation is in the reverse order of removal.
Route the wire harness and hoses properly (page 1-25).
E, ED, F, KO, RU type:
[8]
U type:
LOWER COWL
REMOVAL/INSTALLATION (NC700X/
XA/S/SA)
Remove the socket bolts [1].
Release the bosses [2] from the grommets [3] and
remove the lower cowl [4].
Installation is in the reverse order of removal.
2-28
[3] [4]
[5]
[6] [8]
[3]
[7]
[4]
[3]
[2]
[9]
[10]
[1]
[1]
[3]
[2]
[1]
[4]