Honda NC700 2012 Service Manual page 273

dummyhead dummyhead
FUEL SYSTEM
INSTALLATION
Install the throttle body assembly [1] to the cylinder
head.
• Align the throttle body tab with the insulator groove.
• Align the insulator band hole with the insulator tab.
Tighten the insulator band screw to the specified range.
Connect the throttle cables [1] to the throttle drum and
throttle cable stay.
Route the cables properly (page 1-25).
Tighten the throttle cable B lock nut [2] securely.
Tighten the throttle cable A adjuster lock nut [3]
securely.
Connect the sensor unit 5P (Black) connector [1] and
IACV 4P (Black) connector [2].
Route the wire harness properly (page 1-25).
Install the air cleaner housing (page 7-14).
Adjust the throttle grip freeplay (page 3-5).
7-18
Align
[1]
11 – 13 mm (0.4 – 0.5 in)
[3]
[2]
Align
[1] [2]
[1]