Table of Contents
Advertisement
dummyhead
dummyhead
DCT SYMPTOM TROUBLESHOOTING
Check the shift indicator "–" blinking of the combination meter (page 12-11).
If the shift indicator "–" is blinking, refer to the DTC index (page 12-15) and begin the appropriate troubleshooting procedure.
If there are no "–" blinking, inspect the engine oil condition and follow the symptom troubleshooting described below.
CLUTCH SLIPS AND MOTORCYCLE DOES NOT ACCELERATE
Check the clutch clearance (page 12-106).
EXCESSIVE NOISE OR VIBRATION AROUND THE DCT SYSTEM
Inspect the following components:
– Clutch clearance
– Dual clutch needle bearings for wear or damage
– Primary drive/sub-gear for wear or damage
– Primary driven gear for wear or damage
– Each fasteners are tightened to their correct torque values
Replace the damaged components if necessary and tighten the loose fasteners to the specified torque.
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
12-5
Hide quick links:
Advertisement
Table of Contents
