Honda NC700 2012 Service Manual page 644

dummyhead dummyhead
SERVICE INFORMATION
GENERAL
Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
Spilling brake fluid will severely damage instrument lenses and painted surface. It is also harmful to some rubber parts. Be careful
whenever you remove the reservoir cover; make sure the front reservoir is horizontal first.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc with a
high quality brake degreasing agent.
• Check the brake system by applying the brake lever or pedal after the air bleeding.
• Never allow contaminates (dirt, water, etc.) to get into an open reservoir.
• Once the hydraulic system has been opened, or if the brake feels spongy, the system must be bled.
• Always use fresh DOT 4 brake fluid from a sealed container when servicing the system. Do not mix different types of fluid, they
may not be compatible.
• Always check brake operation before riding the motorcycle.
• This section covers service of the conventional brake components of the brake system. For Anti-lock Brake System (ABS)
service (page 20-4).
SPECIFICATIONS
Front Specified brake fluid
Brake disc thickness
Brake disc warpage
Master cylinder I.D.
Master piston O.D.
Caliper cylinder I.D. (NC700X/S)
Caliper piston O.D. (NC700X/S)
Caliper cylinder I.D.
(NC700XA/XD/SA/SD)
Caliper piston O.D.
(NC700XA/XD/SA/SD)
Rear Specified brake fluid
Brake disc thickness
Brake disc warpage
Master cylinder I.D.
Master piston O.D.
Caliper cylinder I.D.
Caliper piston O.D.
Brake pedal height
ITEM
Cylinder A
Cylinder B
Piston A
Piston B
STANDARD
DOT 4
4.8 – 5.2 (0.19 – 0.20)
–
11.000 – 11.043 (0.4331 – 0.4348)
10.957 – 10.984 (0.4314 – 0.4324)
27.000 – 27.050 (1.0630 – 1.0650)
26.918 – 26.968 (1.0598 – 1.0617)
22.650 – 22.700 (0.8917 – 0.8937)
27.000 – 27.050 (1.0630 – 1.0650)
22.585 – 22.618 (0.8892 – 0.8905)
26.918 – 26.968 (1.0598 – 1.0617)
DOT 4
4.8 – 5.2 (0.19 – 0.20)
–
14.000 – 14.043 (0.5512 – 0.5529)
13.957 – 13.984 (0.5495 – 0.5506)
38.18 – 38.23 (1.503 – 1.505)
38.098 – 38.148 (1.4999 – 1.5019)
85.0 – 87.0 (3.35 – 3.43)
HYDRAULIC BRAKE
Unit: mm (in)
SERVICE LIMIT
–
4.0 (0.16)
0.30 (0.012)
11.055 (0.4352)
10.945 (0.4309)
27.060 (1.0654)
26.91 (1.059)
22.712 (0.8941)
27.060 (1.0654)
22.56 (0.888)
26.91 (1.059)
–
4.0 (0.16)
0.30 (0.012)
14.055 (0.5533)
13.945 (0.5490)
38.24 (1.506)
38.09 (1.500)
–
19-5