Honda NC700 2012 Service Manual page 587

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Install the clutch lever bracket [1], holder [2] ("UP" mark
[3] facing up) and bolts [4].
Align the end of the clutch lever bracket with the punch
mark on the handlebar, and tighten the upper bolt first,
then the lower bolt.
Connect the clutch switch connectors [5].
Install the handlebar weight [1] to both handlebars
aligning each cutout.
Hold the handlebar weight [1].
Install and tighten a new handlebar weight mounting
screw [2] to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the rearview mirrors [1] and wire bands [2].
Adjust the following:
– Clutch lever freeplay (page 3-26)
– Throttle grip freeplay (page 3-5)
17-16
[2]
[4]
Align
[1]
[1] Align [5]
[3]
[1]
[2]
[1]
[2]