Table of Contents
Advertisement
dummyhead
dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (NC700XD/SD)
INSTALLATION
TR SENSOR
12 N·m (1.2 kgf·m, 9 lbf·ft)
14 N·m (1.4 kgf·m, 10 lbf·ft)
Apply 2 – 4 g (0.07 – 0.14 oz) of specified grease to the
reduction gear journals and teeth.
SPECIFIED GREASE: Templex N3 grease (ESSO)
Install reduction gear B [1] and align the gear ends with
the ribs of the crankcase. Then install reduction gear C
[2] so the punch marks [3] on the gear and shift spindle
line up as shown.
Install reduction gear A [4].
Install the dowel pins [1] and a new gasket [2].
12-110
REDUCTION GEAR
O-RING
CASE COVER
GASKET
14 N·m (1.4 kgf·m, 10 lbf·ft)
REDUCTION GEAR C
REDUCTION GEAR B
REDUCTION GEAR A
SHIFT CONTROL MOTOR
Align
[2]
[4]
[2]
O-RING
[1]
Align
[1]
[3]
Hide quick links:
Advertisement
Table of Contents
