Honda NC700 2012 Service Manual page 638

dummyhead dummyhead
Install the left step holder [1] and step holder mounting
socket bolts [2].
Tighten the step holder mounting socket bolts to the
specified torque.
TORQUE: 32 N·m (3.3 kgf·m, 24 lbf·ft)
Install the gearshift arm [1] to the gearshift spindle.
NC700X/XA/S/SA:
Align the gearshift arm slit with the gearshift spindle
punch mark.
Install and tighten a new gearshift arm pinch bolt [2] to
the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the following:
– Muffler (page 2-32)
– Rear wheel (page 18-11)
REAR WHEEL/SUSPENSION
NC700X/XA/S/SA shown:
[1]
NC700X/XA/S/SA:
[2]
[2]
Align [1]
18-25