Honda NC700 2012 Service Manual page 345

dummyhead dummyhead
CLUTCH/GEARSHIFT LINKAGE (NC700X/XA/S/SA)
CLUTCH LIFTER ROD B
Check the clutch lifter rod B for damage or abnormal
wear.
CLUTCH DISC
Replace the clutch discs if they show signs of scoring or
Replace the clutch
discoloration.
discs and plates as
a set.
Measure the disc thickness of each disc.
SERVICE LIMIT: 2.3 mm (0.09 in)
CLUTCH PLATE
Check the plates for discoloration.
Replace the clutch
discs and plates as
Check the plate warpage on a surface plate using a
a set.
feeler gauge.
SERVICE LIMIT: 0.30 mm (0.012 in)
JUDDER SPRING/SPRING SEAT
Check
deformation, warpage or damage.
• A damaged or warped spring seat will cause the
judder spring to be pressed unevenly.
• A damaged judder spring also causes the weak
contact between the discs and plates or uneven
disc/plate contact.
11-10
the judder spring and spring seat for