Honda NC700 2012 Service Manual page 118

dummyhead dummyhead
WINDSCREEN
REMOVAL/INSTALLATION (NC700X/XA/XD)
Remove the socket bolts [1], washers [2] and windscreen [3].
Remove the special nuts [4] and cushion rubbers [5] if necessary.
Installation is in the reverse order of removal.
If you wish the windscreen position upward, you can choose high position.
– High position: Install the special nuts to the upper holes.
– Low position: Install the special nuts to the lower holes.
[1]
REMOVAL/INSTALLATION (NC700S/SA/SD)
Remove the socket bolts [1], plastic washers [2], rubbers [3] and windscreen [4].
Remove the special nuts [5] if necessary.
Installation is in the reverse order of removal.
[2]
[1]
[3] [4]
[2]
[4] [5]
[3]
FRAME/BODY PANELS/EXHAUST SYSTEM
[5]
Low position High position
2-23