Honda NC700 2012 Service Manual page 177

dummyhead dummyhead
PGM-FI SYSTEM
DTC
(MIL Function Failure
blinks)
Bank angle sensor circuit low voltage
54-1 (less than 0.020 V)
(54) • Bank angle sensor or its circuit
malfunction
Bank angle sensor circuit high voltage
(more than 4.986 V)
54-2 • Loose or poor contact of the bank
(54) angle sensor connector
• Bank angle sensor or its circuit
malfunction
84-1 CPC in the PCM malfunction
(84) • Faulty PCM
Meter communication malfunction
86-1 • Open or short circuit in the TXD/RXD
(86) wire
• Faulty combination meter
EOP switch high voltage (more than
1.001 V)
87-1 • Loose or poor contact of the EOP
(87) switch connector
• Open circuit in the EOP switch wire
• EOP switch or its circuit malfunction
4-16
Symptom/Fail-safe function
• Engine operates normally
• Engine stop function does not
operate
• Engine operates normally
• Engine stop function does not
operate
• Gearshift system stops
• Engine operates normally
• Engine operates normally
• Oil pressure indicator stays on
Refer
Refer to
to
(MIL)
(DTC)
4-37
4-58
4-38
4-40 4-59
4-40 4-60
4-42 4-62