dummyhead
dummyhead
5. To prevent damage and keep foreign matter out,
cover the disconnected connector and pipe end with
the plastic bags [1].
FUEL PUMP SIDE QUICK CONNECT FITTING
INSTALLATION
• Always replace the retainer and joint rubber of the
quick connect fitting when the fuel feed hose is
disconnected.
• Replace the retainer and joint rubber with the same
manufacturer's item that was removed.
• Do not bent or twist fuel feed hose.
1. Insert a new retainer [1] into the connector [2].
• Align new retainer locking pawls with the connector
grooves.
2. Set a new joint rubber [1] as shown.
Then press the quick connect fitting onto the pipe
until both retainer pawls [2] lock with a "CLICK".
• Align the quick connect fitting with the pipe.
• If it is hard to connect, put a small amount of engine
oil on the pipe end.
[2]
Align
[1]
FUEL SYSTEM
[1]
[1]
[2]
7-9