Honda NC700 2012 Service Manual page 667

dummyhead dummyhead
HYDRAULIC BRAKE
INSPECTION
Check the caliper cylinder for scoring or other damage.
Measure the each caliper cylinder I.D.
SERVICE LIMIT: 27.060 mm (1.0654 in)
Check the caliper pistons for scratches, scoring or other
damage.
Measure the each caliper piston O.D.
SERVICE LIMIT: 26.91 mm (1.059 in)
FRONT BRAKE CALIPER (NC700XA/
XD/SA/SD)
REMOVAL/INSTALLATION
Drain the brake fluid from the hydraulic system (page
19-11).
Remove the brake pads (page 19-17).
Remove the bolt [1] and front wheel speed sensor wire
guide [2].
Remove the bolts [3] and front wheel speed sensor [4].
Remove the brake hose oil bolts [1], sealing washers [2]
and brake hoses.
When removing the oil bolt, cover the end of brake hose
to prevent contamination.
19-28
[1]
[3]
[1]
[2]
[4]
[2]