Honda NC700 2012 Service Manual page 112

dummyhead dummyhead
DISASSEMBLY/ASSEMBLY
Remove the screws [1] and seat lock assembly from the center cover [2].
Remove the screws [3] and center inner cover [4].
Remove the clip [5], cable guide [6] and seat lock [7].
Assembly is in the reverse order of disassembly.
Align the seat lock tab [8] with the clip and cable guide cutouts [9].
[1]
[3]
[5]
LUGGAGE BOX LID
REMOVAL/INSTALLATION (NC700X/XA/XD)
Open the luggage box lid using the ignition key.
Remove the luggage box assembly screw (long) [1] and
disconnect the band [2].
Remove the following:
– Luggage box lid mounting socket bolts [3]
– Luggage box lid lock plate mounting screw [4]
– Luggage box lid assembly screws [5]
– Inner luggage box lid [6]
– Luggage box lid lock plate [7]
– Luggage box lid A/B [8]
[4]
[6]
[3]
[9]
FRAME/BODY PANELS/EXHAUST SYSTEM
[2]
[7]
[8]
[8]
[5]
[2]
[1]
[7] [6]
2-17
[4]
[3]