Honda NC700 2012 Service Manual page 561

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Connect the ECT sensor 2P connector [1].
Connect the water hose [2] to the thermostat cover.
Align the water hose paint mark with the thermostat
cover tab.
Install the main wire harness [3] to the stay [4] and
frame [5].
Tighten the water hose band screw to the specified
range.
Connect the EOP switch 1P (Gray) connector [1].
Install the stay [2] and bolts [3] to the frame.
Tighten the bolts securely.
Install the spark plug wire clamp [1] to the frame.
Connect the spark plug cap [2].
16-18
[4] Align
[1] [3]
0 – 1 mm
(0 – 0.04 in)
[1]
[1]
[2]
[5]
[3] [2]
[2]