Honda NC700 2012 Service Manual page 599

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Remove the following:
– Oil seal [1]
– Back-up ring [2]
– Guide bushing [3]
INSPECTION
FORK SPRING
Check the fork spring for fatigue or damage.
Measure the fork spring free length.
SERVICE LIMITS:
NC700X/XA/XD: 387.0 mm (15.24 in)
NC700S/SA/SD: 349.9 mm (13.78 in)
FORK PIPE/SLIDER
Check the fork pipe [1] and slider [2] for score marks,
scratches, or excessive or abnormal wear.
Place the fork pipe on V-blocks.
Turn the fork pipe and measure the runout using a dial
indicator.
Actual runout is 1/2 of the total indicator reading.
SERVICE LIMIT: 0.20 mm (0.008 in)
17-28
[1]
[2]
[2] [3]
[1]