Honda Accord 2008 Manual page 85

07/11/02 09:05:36 61TA0000_040_0039
Charging System
Alternator Overhaul (cont'd)
7. Remove the four bolts, then remove the rear
housing assembly (A), and washer (B).
＊０６
A
8. If you are not replacing the front bearing, go to
step 13. Remove the rotor from the drive end
housing.
＊０７
4-38
9. Inspect the rotor shaft for scoring, and inspect the
bearing journal surface in the drive end housing for
seizure marks.
• If the rotor is damaged, replace the rotor
assembly.
• If the rotor is OK, go to step 10.
10. Remove the front bearing retainer.
B
11. Drive out the front bearing with a brass drift and
hammer.
＊０８
＊０９