Honda Accord 2008 Manual page 110

07/11/02 09:07:42 61TA0000_050_0011
60. Remove the upper transmission mount bracket
mounting bolts.
NOTE: Do not remove the TORX bolt (A) from the
upper transmission mount. If the TORX bolt is
removed, the upper transmission mount must be
replaced as an assembly.
M/T model
＊３０
A/T model
＊３１
61. Remove the ground cable.
62. Check that the engine/transmission is completely
free of vacuum hoses, fuel and coolant hoses, and
electrical wiring.
63. Slowly lower the engine/transmission about
150 mm (6 in.). Check once again that all hoses and
electrical wiring are disconnected and free from the
engine/transmission, then lower it all the way.
64. Disconnect the chain hoist from the engine/
A
transmission.
65. Raise the vehicle, and remove the engine/
transmission from under the vehicle.
A
5-11