Honda Accord 2008 Manual page 116

07/11/02 09:07:47 61TA0000_050_0017
31. A/T model: Install the rear engine mount upper
bracket (A), then install the rear engine mount (B).
＊１６
12 x 1.25 mm
54 N·m (5.5 kgf·m, 40 lbf·ft)
Replace.
12 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
32. Loosen the mounting bolts for the side engine
mount bracket, then retighten the bolts in the
numbered sequence shown.
＊１７
10 x 1.25 mm
54 N·m
(5.5 kgf·m,
40 lbf·ft)
A B
Replace.
12 x 1.25 mm
79 N·m
(8.1 kgf·m,
59 lbf·ft)
Replace.
10 x 1.25 mm
54 N·m
(5.5 kgf·m,
40 lbf·ft)
Replace.
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
Replace.
33. Loosen the mounting bolts for the upper
transmission mount bracket, then retighten them to
the specified torque.
M/T model
12 x 1.25 mm
59 N·m
(6.0 kgf·m, 43 lbf·ft)
Replace.
A/T model
12 x 1.25 mm
59 N·m (6.0 kgf·m, 43 lbf·ft)
Replace.
＊１８
＊１９
(cont'd)
5-17