Honda Accord 2008 Manual page 107

07/11/02 09:07:40 61TA0000_050_0008
Engine Assembly
Engine Removal (cont'd)
42. Install the engine support hanger (AAR-T1256),
then attach the hook to the slotted hole in the
engine hanger adapter. Tighten the wing nut (A) by
hand to lift and support the engine/transmission.
NOTE: Be careful when working around the
windshield.
＊１８
43. Remove the vacuum hose (A) and the front engine
mount stop (B), then remove the front engine
mount bolt (C).
＊１９
A
C
44. A/T model: Remove the ATF cooler pipe brackets
(D).
5-8
A AAR-T1256
B
D
D
45. M/T model: Remove the rear engine mount.
46. A/T model: Remove the rear engine mount (A), then
remove the rear engine mount upper bracket (B).
B
A
＊２０
＊２１