Honda Accord 2008 Manual page 111

07/11/02 09:07:43 61TA0000_050_0012
Engine Assembly
Engine Installation
Special Tools Required
• Universal eyelet 07AAK-SNAA120
• Frame positioning guide pin 070AG-SJAA10S
• Engine hanger adapter VSB02C000015
• Front subframe adapter VSB02C000016
• Engine support hanger, A and Reds AAR-T1256
: These special tools are available through the Honda Tool and Equipment Program, 1-888-424-6857
1. Install the accessory brackets, and tighten their bolts to the specified torque.
＊０１
12 x 1.25 mm
88 N·m
(9.0 kgf·m, 65 lbf·ft)
Replace.
REAR ENGINE
MOUNT BRACKET
(M/T model)
12 x 1.25 mm
88 N·m
(9.0 kgf·m, 65 lbf·ft)
Replace.
10 x 1.25 mm
44 N·m
(4.5 kgf·m, 33 lbf·ft)
5-12
ＴＡ０８ＡＥ４Ａ１８２２３８０００００ＫＣＡＴ００
REAR ENGINE
MOUNT BRACKET (A/T model)
SIDE ENGINE
MOUNT BRACKET
FRONT ENGINE
MOUNT BRACKET (A/T model)
FRONT ENGINE
MOUNT BRACKET (M/T model)
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
Replace.
10 x 1.25 mm
45 N·m
(4.5 kgf·m, 33 lbf·ft)
A/C COMPRESSOR BRACKET
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
Replace.