Honda Accord 2008 Manual page 112

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:07:44 61TA0000_050_0013

2. Raise the vehicle on the lift, and position the

engine/transmission under the vehicle. Lower the

vehicle, and attach the universal eyelet (07AAK-

SNAA120) and chain hoist to the engine, then lift

the engine into position in the vehicle.

NOTE: Reinstall the mounting bolts and support

nuts in the sequence given in the following steps.

Failure to follow this sequence may cause

excessive noise and vibration, and reduce engine

3. Attach the engine hanger adapter (VSB02C000015)

to the threaded hole in the cylinder head.

4. Install the engine support hanger (AAR-T1256),

then attach the hook to the slotted hole in the

engine hanger adapter. Tighten the wing nut (A) by

hand to lift and support the engine/transmission.

NOTE: Be careful when working around the

VSB02C000015

Chapters

Table of Contents