Honda Accord 2008 Manual page 142

07/11/02 09:22:26 61TA0000_060_0019
19. Install the side engine mount bracket, then tighten
the side engine mount bracket mounting bolts.
＊１５
10 x 1.25 mm
44 N·m
(4.5 kgf·m, 33 lbf·ft)
20. Tighten the new side engine mount bracket
mounting bolts in the numbered sequence shown.
＊１６
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
21. Install the ground cable.
12 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
Replace.
22. Install the crankshaft pulley (see page 6-12).
23. Install the VTC oil control solenoid valve (see page
11-325).
24. Connect the VTC oil control solenoid valve
connector (A).
25. Install the cylinder head cover (see page 6-26).
26. Install the drive belt (see page 4-31).
27. Install the splash shield (see step 48 on page 5-20).
28. Install the front wheels.
29. Do the crankshaft position (CKP) pattern clear/CKP
pattern learn procedure (see page 11-5).
＊１７
A
6-19