Honda Accord 2008 Manual page 113

07/11/02 09:07:45 61TA0000_050_0014
Engine Assembly
Engine Installation (cont'd)
5. Tighten the upper transmission mount bracket
mounting bolts to the specified torque.
M/T model
＊０５
12 x 1.25 mm
59 N·m
(6.0 kgf·m, 43 lbf·ft)
Replace.
A/T model
＊０６
6. Install the ground cable.
7. Support the engine with a jack and a wood block
under the oil pan.
5-14
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
12 x 1.25 mm
59 N·m (6.0 kgf·m, 43 lbf·ft)
Replace.
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
8. Remove the chain hoist.
9. Remove the universal eyelet.
10. Tighten the side engine mount bracket mounting
bolts in the numbered sequence shown.
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
Replace.
11. Install the ground cable.
07AAK-SNAA120
10 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
＊０７
＊０８