Toshiba e-STUDIO556 Service Manual page 608

Check item
Drive unit, Rollers
Replace parts
Reverse sensor-1
Reverse motor
Gate solenoid
LGC board
Rollers
[E580] Paper stopping at reverse section
Classification
Paper transport jam
Check item
Reverse sensor-1, 2
(S23, S24)
Reverse motor
(M19)
LGC board
Drive unit, Rollers
Replace parts
Reverse sensor-1, 2
Reverse motor
LGC board
Rollers
[E590] Paper stopping at exit section
Classification
Paper transport jam
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
• Gear check
• Roller check
The trailing edge of paper does not pass the reverse sensor-1 or reverse
sensor-2 after its leading edge has reached the reverse sensor-1 or
reverse sensor-2.
• Sensor check (Perform the input check: 03-[FAX]OFF/[7]/[E], /[7]/[D])
• Connector check
• Harness check.
• Motor check (Perform the output check: 03-126)
• Speed check (05-4538, 05-4539, 05-4540
• Connector check
• Harness check.
• Connector check (CN335)
• Board check.
• Gear check
• Roller check
The trailing edge of paper does not pass the exit sensor after its leading
edge has reached the exit sensor.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 56
Measures
Remarks
Error item
Measures
Remarks
Error item