Toshiba e-STUDIO556 Service Manual page 213

[ 7 ] Drawer detection sensor (S29/S35/S41/S47)
(1) Disconnect 1 connector to take off the
drawer detection sensor.
[ 8 ] Drawer feed sensor (S34/S40/S46/S52)
(1) Remove 1 screw to take off the drawer feed
sensor with its bracket.
(2) Disconnect 1 connector to take off the
drawer feed sensor.
[ 9 ] Drawer bottom sensor (S30, S37, S42, S48)
(1) Take off all the feed units.
( P.4-44 "4.6.1 Paper feeder unit / Bypass
feed unit")
(2) Disconnect the connector and take off each
drawer bottom sensor.
Note:
Equipment with the LCF does not have the
3rd and 4th drawer bottom sensors.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Drawer detection sensor
Fig. 4-134
Drawer feed sensor
Fig. 4-135
Fig. 4-136
e-STUDIO556/656/756/856/557/657/757/857
4 - 49
Drawer
bottom sensor
DISASSEMBLY AND REPLACEMENT
4