Toshiba e-STUDIO556 Service Manual page 182

Note:
When installing the carriage-1, fix its bracket
temporarily at the cutout of the frame. : (A)
After that, move the carriage until it touches
the left side (B) of the frame, and then tighten
2 screws to fix it permanently.
4.3.8 Exposure lamp (EXP)
(1) Take off the top rear cover.
( P.4-3 "4.1.6 Top rear cover")
(2) Take off the original glass.
( P.4-11 "4.3.1 Original glass")
(3) Move the carriage-1 to the center position.
Note:
Rotate the drive pulley to move the carriage.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 18
( A )
( B )
( A )
Fig. 4-48
Fig. 4-49
Drive pulley
Fig. 4-50