Toshiba e-STUDIO556 Service Manual page 302

4.13.5 RADF left cover
(1) Remove the RADF front cover.
( P.4-135 "4.13.2 RADF front cover")
(2) Remove the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(3) Remove 2 screws and take off the RADF left
cover.
4.13.6 Original tray
(1) Take off the paper feeder unit.
( P.4-145 "4.13.13 Paper feeder unit")
(2) Disconnect 1 connector from the RADF
board.
(3) Remove 1 screw and take off the bushing.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
LED3
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 138
Fig. 4-385
Fig. 4-386
Fig. 4-387