Toshiba e-STUDIO556 Service Manual page 360

5.6 Adjustment mode (05)
Items in the adjustment mode list in the following pages can be corrected or changed in the
adjustment mode (05). Turn ON the power with pressing the digital keys [0] and [5] simultaneously
in order to enter this mode.
When the power should be turned OFF, be sure to shut down the equipment by pressing the [ON/
OFF] button for a few seconds.
Procedure 1
[Digital key]
[0][5]
(Code)
[POWER]
Procedure 2
[0][5] (Code)
[POWER]
Procedure 3
[Digital key]
[0][5]
(Code)
[POWER]
Procedure 4
[0][5]
[Digital key]
[START]
[POWER]
(Code)
Procedure 6
[Digital key]
[0][5]
[POWER] (Code)
* When the automatic adjustment ends abnormally, error message is displayed.
e-STUDIO556/656/756/856/557/657/757/857
SELF-DIAGNOSTIC MODE
[Digital key]
[START] *[FUNCTION CLEAR]
(Key in a value)
[CANCEL]
(Corrects value)
( )
Value
[START]
displayed
(Value unchangeable)
[UP]
or
[START]
[DOWN]
(Adjust a value)
[CANCEL]
(Corrects value)
[CANCEL]
[START]
[Digital key]
[START]
(Sub code)
[CLEAR]
(Corrects value)
(
Automatic
[START]
adjustment
*[CANCEL] or [CLEAR]
5 - 10
[OK]
or
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
*Press [FUNCTION CLEAR] to enter minus (-).
[OK]
[POWER]
or
OFF/ON
[INTERRUPT]
(Exit)
[OK]
or
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
[OK]
[Digital key]
* [FUNCTION CLEAR]
[INTERRUPT]
(Key in a value)
(
Stores value
in RAM
[CLEAR]
(Corrects value)
*Press [FUNCTION CLEAR] to enter minus (-).
)
([FAX] )
[START]
(Test copy)
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[POWER]
([FAX] )
OFF/ON
(Exit)
[START]
(Test copy)
[POWER]
([FAX] )
OFF/ON
(Exit)
[START]
(Test copy)
[POWER]
or ([FAX] )
OFF/ON
(Exit)
)
[START]
(Test copy)
[POWER]OFF/ON
(Exit)