Toshiba e-STUDIO556 Service Manual page 750

[6121]
Automatic Secure Erase failure
Classification
MFP access error
Check item
Setting
[6131]
Clock skew failure to time server
Classification
MFP access error
Check item
Setting
[6150] Print log DB full
Classification
MFP access error
Check item
Setting
[6151]
Print log DB near-full (95%)
Classification
MFP access error
Check item
Setting
[6152]
Print log DB near-full (90%)
Classification
MFP access error
Check item
Setting
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
The automatic secure erase fails.
Data overwriting failed for some reason. If the error still
occurs after rebooting the equipment, start up using the
following procedure: [3] + [C] + [POWER] -> 3. HDD formatting
-> Reinstallation of software or HDD replacement
MFP fail to verify clock with Time Server
Check that the time server works properly. Moreover, log into TopAccess as
an administrator, and check that the SNTP setting is correct.
Print Log full (100% Used) Log OverWrite will be start.
Perform Clear Log with TopAccess Logs > Export Logs > Print Job Log
Export.
Print Log near full (95% Used).
Perform Clear Log with TopAccess Logs > Export Logs > Print Job Log
Export.
Print Log near full (90% Used).
Perform Clear Log with TopAccess Logs > Export Logs > Print Job Log
Export.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 198
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures