Toshiba e-STUDIO556 Service Manual page 732

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

[2E45] Meta data creation error in USB storage (Scan to File)

Classification

File sharing related error

Replace parts

[2E65] File creation error due to insufficient USB folder capacity

Classification

File sharing related error

Replace parts

[2E66] HDD full failure during USB storage

Classification

File sharing related error

Replace parts

[2EC1] Power failure in USB storage

Classification

File sharing related error

e-STUDIO556/656/756/856/557/657/757/857

ERROR CODE AND TROUBLESHOOTING

Creation of meta data failed.

Check the template settings. Perform the job in error again. If the error still

occurs, turn the power OFF and then back ON, and then perform the job in

error again.

Creation of a new file failed because there were too many files in the USB

Delete unnecessary files in the folder.

HDD became full while storing data in HDD.

Delete the job in progress or being set or in the HOLD/PRIVATE/PROOF/

INVALID, and perform it again.

Check if the server or local disk has a sufficient space in disk capacity.

Check that there is enough space in the USB memory.

Power failure occurred.

Check if the power cable is connected properly and inserted securely.

Check if the power voltage is unstable.